Call Us
+8618633052223
E-mail
njhdvlz@163.com
English
  • Home
  • Products
  • Wafer Type Check Valve: Space-Saving, Non-Slam Performance?

Oct . 08, 2025 22:35 Back to list

Wafer Type Check Valve: Space-Saving, Non-Slam Performance?



Series F16 Dual Plate Wafer Check Valve: Field Notes, Specs, and Real-World Use

If you’re speccing a wafer type check valve for a tight piping envelope, you probably want two things: low pressure drop and zero drama on water hammer. The Series F16 from Hongda Valve checks both boxes—and a couple more, to be honest. Built in the development area of Huanmadian, NingJin county, Hebei, this dual plate design is made to API 594 and tested to API 598, which is exactly what many project specs ask for.

Wafer Type Check Valve: Space-Saving, Non-Slam Performance?

What stands out (and why engineers pick it)

The split dual-plate disc and torsion spring close quickly—non-slam behavior is the whole point. Face-to-face follows ISO 5752 basic series 16 (wafer long), so drop-in swaps are straightforward. Series F16 mates with GB, DIN, and BS flanges; there’s also an F125 line for heavier-duty envelopes. In practice, installers like that it centers easily and doesn’t weigh a ton. I guess that’s why it shows up in HVAC risers and seawater pump rooms alike.

Typical specifications (project submittal ready)

Design standard API 594; Face-to-face ISO 5752 series 16 (wafer long)
Inspection & testing API 598 (shell ≈1.5× rated P, seat ≈1.1×; real-world use may vary)
Sizes ≈ DN50–DN600 (contact for larger)
Pressure class PN10/16/25 (project dependent)
Body / disc WCB, CF8/CF8M; options for duplex on request
Seat options NBR, EPDM, Viton; bubble-tight per API 598 (soft seat)
Spring 17-7PH or equivalent; cycle life ≥100,000 cycles (lab)
Cracking pressure ≈ 0.02–0.05 bar (size dependent)
Flange compatibility GB, DIN, BS patterns

Process, materials, and testing

Cast bodies are CNC-machined, shot-blasted, and cleaned; discs receive surface finishing to minimize hysteresis. Seats are bonded or replaceable depending on spec. NDE (visual + dye penetrant on critical sealing edges) is routine. Hydrostatic shell test at ≈1.5× rating and seat test at ≈1.1× per API 598. PMI on stainless heats, with heat numbers traceable—yes, inspectors like that. Typical ΔP on water at ~1 m/s: around 2–6 kPa depending on DN.

Where it’s used

- HVAC chilled/condensed water (quiet closure matters at night).
- Desalination intakes and brine lines; wafer type check valve saves space in crowded skids.
- Fire protection jockey pumps (consult your AHJ).
- Chemical and food lines with elastomer selection tuned to media; wafer type check valve with EPDM sees a lot of CIP duty.
- Power, pulp & paper, general waterworks.

Vendor snapshot (what buyers compare)

Vendor Design & Standards Typical Lead Time Notes
Hongda (Series F16) API 594, API 598, ISO 5752 S16 ≈ 2–4 weeks GB/DIN/BS flange compatibility; solid value
Premium EU Brand API 594/EN; PED docs ≈ 6–10 weeks Broad material catalog; higher price
Generic Import Varies by lot Stock or quick Check test certificates closely

Customization and documentation

Options: exotic alloys (on request), NBR/EPDM/Viton seats, coatings for saline service, low-ΔP trims, tag/marking per project, and hydro test videos (some clients love these). Certificates: ISO 9001 quality management, CE/PED dossiers where applicable. NACE MR0175 materials compatibility review available when sour-service is flagged.

Quick case notes

- Coastal pump station: swapping swing checks for dual-plate wafer type check valve cut slam complaints to near zero; maintenance logged fewer hinge issues over 18 months.
- Brewery CIP loop: EPDM-seated F16 handled 85–90°C cycles; one operator told me “install was easy—gaskets lined up first try,” which is rarer than it should be.

References

  1. API 594, Check Valves: Flanged, Lug, Wafer, and Butt-welding End.
  2. API 598, Valve Inspection and Testing.
  3. ISO 5752, Metal Valves—Face-to-Face and Centre-to-Face Dimensions (Series 16).
  4. EN/GB/DIN/BS flange standards for dimensional compatibility (project-specific editions).

Next：

Latest news

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Hit enter to search or ESC to close