Call Us
+8618633052223
E-mail
njhdvlz@163.com
English
  • Home
  • Products
  • 8 Wafer Butterfly Valve – High-Torque, Leak‑Tight, ISO Mount

Nov . 06, 2025 12:00 Back to list

8 Wafer Butterfly Valve – High-Torque, Leak‑Tight, ISO Mount



Why the 8 Wafer Butterfly Valve still sets the benchmark in 2025

If you work in water treatment, HVAC, or light process duty, you already know the market has quietly standardized around the wafer-style butterfly for mid-size lines. To be honest, a lot of the innovation now is in materials and test rigor rather than reinvention. The Series F170 from Hongda, built in the development area of Huanmadian, NingJin county, Hebei, is a good snapshot of where things are going: compact, standards-led, and surprisingly customizable for the price point.

8 Wafer Butterfly Valve – High-Torque, Leak‑Tight, ISO Mount

Quick context: trends and compliance

The F170 wafer valve is designed to comply with MSS SP-67, BS5155, and API 609. It mates up with GB, ANSI, DIN, BS, and JIS flanges—handy when you’re juggling mixed plant standards. Sizes run 2″ to 12″; for the 8 Wafer Butterfly Valve, most buyers pick PN10/PN16 or Class 125/150 equivalents. One-piece thru shaft for dependability, stem-drive disc movement—nothing exotic, which is exactly why maintainers like it.

Typical specs for an 8 Wafer Butterfly Valve

Nominal Size 8" (DN200)
Pressure Class PN10/PN16; Class 125/150 (flange compatibility)
Body/Disc Options Ductile iron, CF8/CF8M; coated DI disc; one‑piece thru shaft
Seat Materials EPDM, NBR, PTFE (real‑world choice depends on media)
Temperature Range EPDM ≈ −20 to 120°C; PTFE up to ≈ 200°C
Face-to-Face Per EN 558 Series 20 (ISO 5752), wafer
Weight ≈ 12–18 kg (actuation-dependent)
Leakage/Tightness ISO 5208 Rate A / EN 12266-1; API 598 seat test

Note: torque and Cv vary by seat and differential pressure—always check the latest data sheet. In fact, many customers say a quick sizing call saved them headaches later.

How it’s built and verified

  • Materials: ductile iron body (EN-GJS-450-10), DI/CF8/CF8M disc, 420/431 SS stem; EPDM/NBR/PTFE seat.
  • Process: precision casting, CNC machining of stem bore and disc hub, vulcanized or replaceable seat fitment.
  • Testing: shell test at ≈1.5× rated pressure; seat test per API 598 / EN 12266-1; torque verification and cycle test.
  • Service life: ≈50,000–100,000 cycles in clean water duty (real-world use may vary).
  • Certifications: compliance with MSS SP‑67, API 609; ISO 9001 quality systems are commonly applied at the plant level.

Where the 8 Wafer Butterfly Valve shines

- Water and wastewater headers, chilled water loops, district cooling; - Light chemical and food-grade utilities (check seat compatibility); - Fire mains (verify local approvals). The wafer body saves space between flanges, and the lug-type cousin covers dead-end service—nice to have both in the catalog.

Vendor snapshot (field-notes view)

Vendor Standards Seat Options Lead Time Warranty Notes
Hongda (F170, Hebei) MSS SP‑67, BS5155, API 609 EPDM/NBR/PTFE ≈ 2–4 weeks 12–18 months Good flange compatibility; one‑piece shaft
Regional Brand B API 609, EN 593 EPDM/PTFE Stock for common sizes 12 months Fewer metallurgy options
Importer C MSS SP‑67 (claimed) EPDM ≈ 4–6 weeks 6–12 months Check test certificates closely

Customization and practical add-ons

Operators ask for gearboxes on the 8 Wafer Butterfly Valve more often than you’d think—safer torque handling. Also common: epoxy or FBE coatings, ISO 5211 mounting pads for electric/pneumatic actuators, and locking levers. For corrosives, PTFE seat plus CF8M disc is the safe bet; for chilled water, EPDM is the value play.

Mini case study

A beverage plant upgraded a 200 mm chilled-water loop with six 8 Wafer Butterfly Valve units, EPDM seats, manual gear. After 18 months (≈ 20,000 cycles), leak checks showed ISO 5208 Rate A tightness; one gearbox lubrication was the only maintenance note. Not glamorous, but that’s the point.

Bottom line

If you need a compact shutoff/control valve with broad flange compatibility and predictable testing, the F170-style 8 Wafer Butterfly Valve is a safe, budget-sensible choice—especially when documentation is tight and downtime is not an option.

  1. API 609: Butterfly Valves—Double-flanged, Lug- and Wafer-type
  2. MSS SP-67: Butterfly Valves
  3. ISO 5208: Industrial valves—Pressure testing of metallic valves
  4. EN 12266-1: Testing of metallic valves

Next：

Latest news

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Hit enter to search or ESC to close